6 & 7 November 2019 | 31st QualTech Prize
Mahindra Automotive Igatpuri Division has a Permanence in Developing Engines. This Division was established in the Year 1983.
6 & 7 November 2019 | 31st QualTech Prize
In one of the Cummins Engine model, there was an Excessive Engine Oil Consumption issue was reported in Compressor application, Where the greater part of Engine business was dependable with our OEM and our direct customer to that market segment.
6 & 7 November 2019 | 31st QualTech Prize
In this highly competitive consumer goods market, where Godrej is competing with the giants of the world, customer expectation and experience matters the most.
6 & 7 November 2019 | 31st QualTech Prize
Case study is based on Compressed air system efficiency improvements as compressed air generation is taking 20% of the total electrical consumption at Vikhroli establishment.
6 & 7 November 2019 | 31st QualTech Prize
Sales of Mahindra tractors of 39 & 42 hp are not appreciable in few states of domestic market due to lower back up torque & customer perception towards Mahindra 4 cylinder engine offering comparing with the competitors offering of same power in 3Cyl. Engine.
6 & 7 November 2019 | 31st QualTech Prize
Body in White (BIW) is the metal shell on which all the systems or aggregates of the vehicle are fitted.
6 & 7 November 2019 | 31st QualTech Prize
JSW Dolvi has 4 MTPA (Million metric ton/Annum) Pellet Plant commissioned in 2014. In pellet plant, iron ore fines (0-10mm) is converted in high strength 9-16mm spherical balls without chemically changing iron ore; by grinding, balling and high temperature heat treatment. Lime, Coke and Bentonite is added as additive to achieve desired property of Iron Ore Pellet.
6 & 7 November 2019 | 31st QualTech Prize
Marico Limited, Baddi is engaged in Refining edible oils. We refine Rice Bran oil (RBO) which is most complex oil due to presence of impurities like Gums, Waxes, FFA. RBO refining is 5 steps process i.e. Degumming>Pre-bleaching>Dewaxing>Post- Bleaching>Deodorization. Each stage of refining removes/reduces a particular impurity.
6 & 7 November 2019 | 31st QualTech Prize
Marico Jalgaon setup in 1990, is engaged in manufacturing of Edible oil under the brand ‘SAFFOLA. There was an emerging need to automate some of the manufacturing processes to meet the market demands .However the challenge was to automate at lowest possible cost in-order to maintain the cost viability.
6 & 7 November 2019 | 31st QualTech Prize
Mahindra After markets was facing T1T2 parts availability at dealers end, so Project was taken to improve T1T2 Stocks, With help of PDCA&DMIAC methods we could able to Increase customer satisfaction by parts availability,
6 & 7 November 2019 | 31st QualTech Prize
In the current scenario each Industry needs the continual improvement for their survival. The primary objective of each management is customer satisfaction along with financial saving.
6 & 7 November 2019 | 31st QualTech Prize
Cummins Engines are used by Indian Railways in DEMU - Diesel Electric Multiple Unit. DEMUs duty cycle needs an Engine to run at low idle when halted for passenger transfer or maintenance. One of DEMU Engine while running at low idle, caught fire due to unburnt fuel through exhaust gas flow.
6 & 7 November 2019 | 31st QualTech Prize
Customer rating is the one of the key metrics being monitored. In that rating, NCR – Non Conformance Report is one of the key element contribution.
6 & 7 November 2019 | 31st QualTech Prize
Requirement for Acrylic Resins are 415 MT which is a combination of self usage and supply to other plants of KNPL post July’2018. But, with the prevailing constraints, possible production is limited to 374 MT/Month.
6 & 7 November 2019 | 31st QualTech Prize
In smelter plant (potline) of Balco, there are two compressor houses (Line 1 & Line 2).Compressor house Line 1 has seven HP compressors (202 m3/min, 6.5 bar, 1210 KW) & Compressor house Line 2 has five HP compressors (280 m3/min, 8 bar, 1600 KW) and two LP compressors (280 m3/min, 4.2 bar, 1100 KW).
6 & 7 November 2019 | 31st QualTech Prize
We at Mahindra are committed to reduce Carbon & Water foot print by 25% till 2019. Nashik Plant comprises of Press, Body, Assembly shops & a single Paint shop.
6 & 7 November 2019 | 31st QualTech Prize
With the disruptive vision to indulge the cutting-edge technology SEL started exploring best in class, globally available resources for manufacturing of engine components.
30 November 2018 | 30th QualTech Prize
In any manufacturing industry,
increase in manufacturing cost will
either lead to loss of profit margin
or if higher selling price is chosen
will account for bigger market loss.
Since similar product with other
competitors might be having less
price.
30 November 2018 | 30th QualTech Prize
The project is related to increase in coolant line productivity by reducing our set up & changeover time increase in productivity is one of our plant KPI’s (Key Performance Indicator) which is being monitored by our corporate level.
30 November 2018 | 30th QualTech Prize
GWEL’s BTG equipment’s were supplied by Shanghai Electric Company (SEC) China. SEC also supplied same specification machines in India to different power utilities like JSW Energy, Reliance Power; HPGCL etc. These machines were installed in India from the year 2008 onwards in different organizations.